|
|
|
1. FIRST THINGS FIRST.
Locate “Centre Front”, “Centre Back” & “Arm” tags.
|
|
|
|
|
|
|
|
2. DRAPE AND TUCK
First REMOVE all cushions. Drape slipcover, puling down over all the main parts of the furniture using positioning tags. Line up so cover is even with the floor on all sides. Tuck into creases using the stitching and piping as a guide to line up along edges.
|
|
|
|
|
|
|
|
3. INSERT CUSHION(S) into zippered cover. You may need to overlap cushions when inserting them into a seat cover and then flatten them before you zipper the cover closed.
|
|
|
|
|
|
|
|
4. PLACE SEAT CUSHION(S) with zippered closure facing the back. Push down until flat. Smooth excess fabric and tuck creases on all three sides.
|
|
|
|
|
|
|
|
5. IF YOU HAVE LOOSE-BACK CUSHIONS
After placing seat cushions, peel back slipcover. Put loose-back cushions back in place.
|
|
|
|
|
|
|
|
6. CONTINUE TO TAILOR THE FIT
A. Locate the centre back and wrap the fabric around to the back of your furniture.
|
|
|
|
|
|
|
|
B. Lift the centre back fabric and insert the elastic through the rings.
|
|
|
|
|
|
|
|
C. Feed elastic through ladder lock as shown in figure C.
|
|
|
|
|
|
|
|
D. Continue to feed elastic through ladder lock as shown in figure D.
|
|
|
|
|
|
|
|
E. Adjust wrap around cord of furniture and pull elastic for a tight fit.
|
|
|
|
|
|
|
|
7. WHEN FINISHED your slipcover should fit snuggly, almost like it was custom-made. It’s “sure” to make a positive impression!
|
